Home      Architectural Finishing & Protection Coatings      Fire Proofing & Water Proofing      Special Products      Enquiry
 

Architectural Finishing Products

Coating Products:
Polyurethane Coating
Epoxy Coating
Elastomeric Texture Coating
Acrylic Coating
Silicone Coating
Anti Algae Coating
Anti Bacterial Coating
 

 

Heavy Duty Floor Products

Coating Products:
Heavy Duty Epoxy Flooring


Clean Room Epoxy Coating System:

     

     

   

 
 
HiPAC A110 Masonry Surface Sealer Coat
A single component oil-based acrylic paint with excellent anti-fungus property.
Highly recommended in places where a high resistance to saponification is required.
 
 
HiPAC AA660 Anti-algae Finishing Coating
High-performance modified Acrylic Resin coating, specially formulated for all masonry surfaces. Excellent resistance for algae/fungus under local climatic condition
 
 
 
HiPAC E220 High-build Epoxy Primer Surfacer
Two-pack Epoxy-polyamide coating, used as a primer/surfacer.
High-build type that allows film to build up to the required film thickness.
Cured film is very hard and extremely abrasion resistant, especially resistant to chemical exposures or scratches.
 
 
 
HiPAC E520 High-build Epoxy Finish
Two-pack Epoxy-polyamide finish coating.
High-build type that allows film to build up to the required film thickness.
Cured film is very hard and extremely abrasion resistant, especially resistant to chemical exposures or scratches.
 
 
 
HiPAC P510 Two-component Polyurethane Finish
Two-component Polyurethane finish coating.
It can be applied over plastics, concrete, masonry, ferrous and non-ferrous substrates with strong abrasion or chemical resistance.
Also can be used on heated surfaces up to 110 degree.
 
 
 
HiPAC P501 Polyurethane UV Clear Coating
Two component Polyol-Isocianate Polyurehtane Clear
It is suitable to environments subjected to UV exposure
 
HiPAC P511 Two-component Polyurethane Finish (Metalic)
Two-component Polyurethane metalic finish.
Also can be used on heated surfaces up to 110 degree.
 
HiPAC P520 Two-pack High-Performance Polyurethane
Two-pack high-build Polyurethane Finish, based on imported Desmodur-Desmophen resins.
It can be applied over plastics, concrete, masonry, ferrous and non-ferrous substrates with strong abrasion or chemical resistance.
Also can be used on heated surfaces up to 110 degree.
 
HiPAC R160 Water-Repellant Penetrative Sealer
A high quality water-based Silane / Silozane Water-Repellant Penetrative Sealer.
Translucent Finish.
 
HiPAC W111 Masonry Surface Sealer Coat
An Acrylic Polymer for excellent alkali and efflorescence resistance properties.
Specially designed as a sealer for new and old cement rendered surface with excellent penetration power onto porous substrates of concrete and cement, thus providing a good base for the subsequent coat.
 
HiPAC W540 Elastomeric Texture Coating
An Acrylic-Rubber based Emulsion paint with superior elasticity. Its elasticity can cover hairline cracks that may develop on the substrate from time to time.
Also excellently resistant to algae or fungus, weathering, water and alkaline.
 
HiPAC W560 Water-based Silicone Coating
Water-based micro-silicone paint.
Excellent water & dirt repellency
 
HiPAC A510 Liquid Thermoplastic Coating
A liquid thermoplastic coating formulated with enhance anti-algae and anti-fungi for anti-carbonation protection of concrete substrates.
 
Hipac W541 Anti-Bacteria Coating
Water-based Anti-baterial Coating Excellent Elasticity with Anti-bacterial, Anti-Fungi Properties.
 
HIKOTE Epoxy Flooring Range of Products
HIKOTE EF960 is two-package epoxy resin flooring material and has such best performance as abrasion resistance, mechanical strength, chemicals resistance, etc. comparing with others. This coating is suitable for elevation of working sites and dust-prevention in factory, laboratory, warehouse, etc.

HIKOTE EF2000 is a special blend of selected epoxy resin, curing agents and graded inert aggregates which when mixed provides a 1.5mm - 4mm epoxy resin floor topping.

HIKOTE EF4000 is a three part solvent free combination of epoxy resin, modified amine hardener filled with specially graded and selected high crushing strength, chemically inert aggregates. The system provides an extremely high strength floor topping with exceptional resistance to attach from mechanical wear and chemical spillage which is impervious and at the same time, produces a safe non-slip finish for personnel and vehicular traffic.

For enquiries, please click here.